Framer Contact Form Guide: Contact Forms, Signups and Integrations

August 3, 2026 | 9 min read

‌

A working contact form is one of the most useful details on any Framer site. It is also where a beautiful design can fall apart: the message never arrives, the confirmation is unclear, or the styling breaks on mobile. This Framer contact form guide walks through the whole system, from native forms to newsletter signups and third-party integrations.

We build Framer templates for a living, and forms are one of the first things buyers ask about. "Does the contact form actually send?" "Can it go to Google Sheets?" "How do I collect emails?" The answer to all three is yes, and setup is simpler than most expect. If you are newer to Framer, start with our beginner template walkthrough first.

What form options does Framer give you?

Framer gives you three ways to collect input: native forms, built-in integrations, and embedded third-party forms. Most small business and portfolio sites can do everything they need with the native option.

Native forms are the components you drag out of the Insert menu. They support multiple field types, custom styling, confirmation states, and submissions to email, Google Sheets, or a custom webhook. Framer also includes built-in spam protection and rate limiting, so you are not starting from zero on security.

Built-in integrations cover services like Formspark, Hubspot, and Typeform. These are useful when the form is part of a larger workflow, such as CRM routing or multi-step questionnaires. If your preferred tool is not on the built-in list, you can paste its embed code into an Embed component instead.

The right choice usually depends on where the submission needs to end up. A simple "get in touch" form can stay native. A lead-qualifying flow probably wants Hubspot. A complex survey is better handled by Typeform or Tally embedded on the page.

How to add a native Framer contact form

Native forms are the fastest path to a working Framer contact form. Open the Insert menu, find the Forms section, and drag a form component onto the page. Framer drops in a pre-styled block with a name field, email field, message area, and submit button.

From there, customize in this order:

Select the form frame and open the form settings. Add or remove fields to match the information you actually need.
Set each field to the right type. Use email validation on the email field, and keep the message field as multi-line text.
Label every field clearly, and add placeholder text only when it helps. Placeholders should never replace labels, because they disappear once the visitor starts typing.
Style the submit button to match your site. Make it the obvious next step: one color, one size, one clear label like "Send message."
Add a success state and an error state. The default text is fine to start, but it should match your brand voice.
Test on mobile. Forms are where narrow screens expose spacing problems first.

One detail we always fix in our templates: set the form width to a readable measure and give the fields enough vertical spacing. A cramped form feels harder to complete, even if it only takes thirty seconds. Our Assistify template uses this exact pattern for its SaaS contact and demo-request flows.

Where do form submissions go?

Framer's native forms can send submissions to three places: an email address, a Google Sheet, or a custom webhook. You pick the destination in the form settings panel.

Email is the default and the simplest. The submission lands in the inbox you specify, formatted as a message. It works well for low-volume sites where one person handles inquiries.

Google Sheets is better when you want a running log. Each submission becomes a row, which makes it easy to sort, tag, and share with a team. This is the option we recommend for most template customers once they start getting regular leads.

Custom webhooks are for advanced setups, such as pushing submissions into your own backend or a Slack channel. Test the destination before you publish. Send a test submission, check that it arrived, and confirm the formatting is usable. A surprising number of live forms fail silently because someone forgot this step.

How to connect Framer form integrations

For teams already using a CRM or marketing stack, Framer's built-in form integrations are usually the better fit. These connect directly in the editor without custom code.

To set one up, add the form or integration component from the Insert menu, choose your service, and follow the authentication steps. Hubspot forms, for example, can route leads straight into a pipeline. Typeform embeds can turn a static page into a conversational survey.

The decision table we use with clients looks like this:

If your tool is not on the list, paste its embed code into an Embed component and style the surrounding page so the embedded form feels like part of the site. Services like Beehiiv and Tally work well this way.

How to build a Framer newsletter form

A framer newsletter form is just an email capture form with a clear promise. Use the Input component, set its type to email, pair it with a submit button, and connect it to your email platform.

Here is the setup we use on content-heavy templates:

Drag an Input component onto the page. Set the field type to email.
Add a short headline above it that says what the subscriber gets. "Weekly Framer tips" beats "Sign up for our newsletter."
Place a clear button next to or below the input. "Subscribe" or "Get the guide" both work better than "Submit."
Connect the form to your email service. Use a built-in integration if available, or paste the embed code if not.
Add a success message that confirms the subscription and tells the visitor what to expect next.

Keep the form short. One field is almost always enough for a first signup. We also recommend placing a newsletter form at the end of blog posts, not just the footer. Someone who finishes an article is warm traffic, and a contextual prompt converts better than a generic footer link. This works especially well once you have followed our guide on how to add a blog to Framer.

How to style form states and error messages

A form is not finished until its empty, focused, filled, success, and error states all look intentional. These micro-states are where trust is won or lost.

For the empty state, make sure labels are readable and placeholders are optional hints, not substitutes. For the focused state, add a visible outline or border color change. For the filled state, keep the label visible so the visitor can review their input.

The success state should feel rewarding. A short confirmation like "Message sent. We'll reply within one business day." closes the loop. The error state should be specific: "Please enter a valid email address" is more useful than "Something went wrong."

One practical note: style error text in a color that fits your palette. Bright red can feel alarming on a calm brand site. A muted terracotta or deep orange carries the same meaning without the visual shock.

Common Framer form mistakes

These are the mistakes we see most often when people send us a Framer site to review. They are all easy to fix once you know to look for them.

No success or error state. The visitor clicks submit and nothing visible happens. Always confirm the action.
Missing field validation. An email field that accepts anything is a field that creates bad leads.
Button blends into the page. The submit button should look like the primary action, not a footer link.
Form is too long. Every extra field lowers completion rate. Ask only what you need to start the conversation.
Destination never tested. The form looks right but submissions go nowhere. Send test data before publishing.
Mobile spacing ignored. Fields that feel generous on desktop can become cramped and hard to tap on a phone.

Run through that checklist before you ship and your framer contact form will already be ahead of most live sites.

Frequently asked questions

Can I use a Framer contact form without code?

Yes. Framer's native forms are built entirely in the visual editor. You drag the form onto the page, adjust fields and styling, and set the submission destination in the properties panel. No custom code is needed for email, Google Sheets, or built-in integrations.

What integrations work with Framer forms?

Framer offers built-in integrations for services including Formspark, Hubspot, and Typeform. For tools not on the built-in list, you can paste an embed code into an Embed component. This covers newsletter platforms like Beehiiv and form builders like Tally.

How do I stop spam on a Framer form?

Framer includes built-in spam protection and rate limiting on native forms. For extra protection, keep your forms short, use email validation, and avoid publishing your form endpoint publicly. If spam still gets through, consider routing submissions through a tool with stronger filtering.

Turn visitors into replies

A Framer contact form is not decoration. It is the handshake that turns a visitor into a lead, a reader into a subscriber, or a stranger into a client. Build it with the right fields, connect it to a destination you actually check, and design every state so visitors feel confident their message went through.

If you would rather start from a template that already has forms styled and connected, browse our Framer templates. Most include contact and newsletter forms wired to the same patterns in this guide. Our Framer CMS tutorial shows how to pair those forms with dynamic content, and how to choose a Framer template helps you pick the right starting point. Forms first, content second, conversations follow.